RHX1013 Cast Alloy Wheel in Silver Machined Lip + Rivets
RHX1013 is a cast alloy wheel (rim) in Silver Machined Lip + Rivets, one of 3 finishes. It is an aftermarket design. It comes in 15 inch: 1 size (15x6), 1 bolt pattern (4x100), offset ET 33 mm and center bore 73.1 mm. Not sure what PCD, ET and CB mean? Read how to choose wheels.
No photo for this finish yet; showing another finish of RHX1013.
Finish
Wheel sizes: 15x6
Bolt patterns (PCD): 4x100
| Size (D x J) | Offset (ET) | Bolt pattern (PCD) | Center bore (CB) | Hole type | Stock | Copy specs |
|---|---|---|---|---|---|---|
| 15x6 | 33 | 4x100 | 73.1 | Cone seat | 2 |
What these numbers mean
- Size (D x J)
- Diameter in inches, then rim width in inches: 15x6 is a 15 inch wheel with a 6 inch wide rim. The J after a width, as in 6J, names the rim flange profile.
- Offset (ET)
- The distance in mm from the wheel's centerline to its mounting face. RHX1013 comes in ET 33; a lower ET sits the wheel further out.
- Bolt pattern (PCD)
- The number of bolts and the diameter in mm of the circle they sit on: 4x100 is 4 bolts on a 100 mm circle. It must match the vehicle.
- Center bore (CB)
- The central hole that sits over the vehicle's hub: 73.1 mm for RHX1013. A bore larger than the hub needs centering rings.
Fits the same bolt pattern and size
Same PCD, wheel diameter and a compatible center bore.
Similar finish and range
Same collection, with a matching finish or vehicle brand.
Similar design
Wheels that look alike, from the same collection. Check the bolt pattern before you order.
