RHX1010 Cast Alloy Wheel
RHX1010 is a cast alloy wheel (rim) in 2 finishes: Hyper Black (Full Paint) and Matte Black (Full Paint). It is an aftermarket design. It comes in 15–16 inch: 2 sizes (15x6, 16x6.5), 3 bolt patterns (4x100, 5x114.3 and 4x114.3), offset ET 35 mm and center bore 73.1 mm. Not sure what PCD, ET and CB mean? Read how to choose wheels.
No photo for this finish yet; showing another finish of RHX1010.
Finish
Wheel sizes: 15x6, 16x6.5
Bolt patterns (PCD): 4x100, 5x114.3
| Size (D x J) | Offset (ET) | Bolt pattern (PCD) | Center bore (CB) | Hole type | Stock | Copy specs |
|---|---|---|---|---|---|---|
| 15x6 | 35 | 4x100 | 73.1 | Cone seat | 0 | |
| 16x6.5 | 35 | 4x100 | 73.1 | Cone seat | 0 | |
| 16x6.5 | 35 | 5x114.3 | 73.1 | Cone seat | 2 |
What these numbers mean
- Size (D x J)
- Diameter in inches, then rim width in inches: 15x6 is a 15 inch wheel with a 6 inch wide rim. The J after a width, as in 6J, names the rim flange profile.
- Offset (ET)
- The distance in mm from the wheel's centerline to its mounting face. RHX1010 comes in ET 35; a lower ET sits the wheel further out.
- Bolt pattern (PCD)
- The number of bolts and the diameter in mm of the circle they sit on: 4x100 is 4 bolts on a 100 mm circle. It must match the vehicle.
- Center bore (CB)
- The central hole that sits over the vehicle's hub: 73.1 mm for RHX1010. A bore larger than the hub needs centering rings.
Fits the same bolt pattern and size
Same PCD, wheel diameter and a compatible center bore.
Similar finish and range
Same collection, with a matching finish or vehicle brand.
Similar design
Wheels that look alike, from the same collection. Check the bolt pattern before you order.
