WD233 Cast Alloy Wheel in Gunmetal Machined Face
WD233 is a cast alloy wheel (rim) in Gunmetal Machined Face, one of 2 finishes. It is an OEM-fit replacement, made to the size, bolt pattern, offset and center bore of the original wheel. It comes in 18 inch: 1 size (18x7), 1 bolt pattern (5x112), offset ET 53.5 mm and center bore 67.1 mm. Listed for Hongqi (H5). Not sure what PCD, ET and CB mean? Read how to choose wheels.
No photo for this finish yet; showing another finish of WD233.
Finish
Wheel sizes: 18x7
Bolt patterns (PCD): 5x112
| Size (D x J) | Offset (ET) | Bolt pattern (PCD) | Center bore (CB) | Hole type | Fits | Stock | Copy specs |
|---|---|---|---|---|---|---|---|
| 18x7 | 53.5 | 5x112 | 67.1 | Cone seat | Hongqi H5 | 50+ |
What these numbers mean
- Size (D x J)
- Diameter in inches, then rim width in inches: 18x7 is a 18 inch wheel with a 7 inch wide rim. The J after a width, as in 7J, names the rim flange profile.
- Offset (ET)
- The distance in mm from the wheel's centerline to its mounting face. WD233 comes in ET 53.5; a lower ET sits the wheel further out.
- Bolt pattern (PCD)
- The number of bolts and the diameter in mm of the circle they sit on: 5x112 is 5 bolts on a 112 mm circle. It must match the vehicle.
- Center bore (CB)
- The central hole that sits over the vehicle's hub: 67.1 mm for WD233. A bore larger than the hub needs centering rings.
You may also like
WD551
1 specs · 1 colour
5x112 · 17"
9012
1 specs · 1 colour
Gunmetal Machined Face
WD235
1 specs · 1 colour
Gloss Black Machined Face
WD234
1 specs · 1 colour
Gunmetal Machined Face
033
2 specs · 2 colours
Gloss Black Machined Face
034
2 specs · 1 colour
Gloss Black Machined Face
035
2 specs · 1 colour
Gloss Black Machined Face
822
1 specs · 1 colour
Gloss Black Machined Face
Similar design
Wheels that look alike, from the same collection. Check the bolt pattern before you order.
