WD551 Cast Alloy Wheel
WD551 is a cast alloy wheel (rim) in 1 finish: Gunmetal Machined Face. It is an OEM-fit replacement, made to the size, bolt pattern, offset and center bore of the original wheel. It comes in 17 inch: 1 size (17x7), 1 bolt pattern (5x112), offset ET 53 mm and center bore 67.1 mm. Listed for Hongqi. Not sure what PCD, ET and CB mean? Read how to choose wheels.
Finish
Wheel sizes: 17x7
Bolt patterns (PCD): 5x112
| Size (D x J) | Offset (ET) | Bolt pattern (PCD) | Center bore (CB) | Hole type | Fits | Stock | Copy specs |
|---|---|---|---|---|---|---|---|
| 17x7 | 53 | 5x112 | 67.1 | Cone seat | Hongqi | 50+ |
What these numbers mean
- Size (D x J)
- Diameter in inches, then rim width in inches: 17x7 is a 17 inch wheel with a 7 inch wide rim. The J after a width, as in 7J, names the rim flange profile.
- Offset (ET)
- The distance in mm from the wheel's centerline to its mounting face. WD551 comes in ET 53; a lower ET sits the wheel further out.
- Bolt pattern (PCD)
- The number of bolts and the diameter in mm of the circle they sit on: 5x112 is 5 bolts on a 112 mm circle. It must match the vehicle.
- Center bore (CB)
- The central hole that sits over the vehicle's hub: 67.1 mm for WD551. A bore larger than the hub needs centering rings.
You may also like
WD233
2 specs · 2 colours
5x112 · 18"
9012
1 specs · 1 colour
Gunmetal Machined Face
WD549
1 specs · 1 colour
Gunmetal Machined Face
WD550
1 specs · 1 colour
Gunmetal Machined Face
WD552
1 specs · 1 colour
Gunmetal Machined Face
7094
1 specs · 1 colour
Gunmetal Machined Face
WD045
8 specs · 2 colours
Gloss Black Machined Face
033
2 specs · 2 colours
Gloss Black Machined Face
Similar design
Wheels that look alike, from the same collection. Check the bolt pattern before you order.
