WD349 Cast Alloy Wheel
WD349 is a cast alloy wheel (rim) in 2 finishes: Gloss Black Machined Face and Gloss Black (Full Paint). It is an OEM-fit replacement, made to the size, bolt pattern, offset and center bore of the original wheel. It comes in 22 inch: 1 size (22x10), 1 bolt pattern (5x130), offset ET 36 mm and center bore 84.1 mm. Listed for Mercedes-Benz. Not sure what PCD, ET and CB mean? Read how to choose wheels.
More wheels for Mercedes-Benz.
No photo for this finish yet; showing another finish of WD349.
Finish
Wheel sizes: 22x10
Bolt patterns (PCD): 5x130
| Size (D x J) | Offset (ET) | Bolt pattern (PCD) | Center bore (CB) | Hole type | Fits | Stock | Copy specs |
|---|---|---|---|---|---|---|---|
| 22x10 | 36 | 5x130 | 84.1 | Ball seat | Mercedes-Benz | 3 |
What these numbers mean
- Size (D x J)
- Diameter in inches, then rim width in inches: 22x10 is a 22 inch wheel with a 10 inch wide rim. The J after a width, as in 10J, names the rim flange profile.
- Offset (ET)
- The distance in mm from the wheel's centerline to its mounting face. WD349 comes in ET 36; a lower ET sits the wheel further out.
- Bolt pattern (PCD)
- The number of bolts and the diameter in mm of the circle they sit on: 5x130 is 5 bolts on a 130 mm circle. It must match the vehicle.
- Center bore (CB)
- The central hole that sits over the vehicle's hub: 84.1 mm for WD349. A bore larger than the hub needs centering rings.
Fits the same bolt pattern and size
Same PCD, wheel diameter and a compatible center bore.
Similar finish and range
Same collection, with a matching finish or vehicle brand.
Similar design
Wheels that look alike, from the same collection. Check the bolt pattern before you order.
