WD0231 Forged Alloy Wheel in Matte Gunmetal Machined Lip Solid
WD0231 is a forged alloy wheel (rim) in Matte Gunmetal Machined Lip Solid, one of 7 finishes. It is an aftermarket design. It comes in 19 inch: 1 size (19x9.5), 1 bolt pattern (5x112), offset ET 35 mm and center bore 66.5 mm. Not sure what PCD, ET and CB mean? Read how to choose wheels.
No photo for this finish yet; showing another finish of WD0231.
Finish
Matte Black Machined Lip + Milled LetteringMatte Gunmetal Machined Lip + Milled LetteringHyper Black (Full Paint)Matte Black Machined LipMatte Gunmetal Machined LipMatte Gunmetal Machined Lip Cut-outMatte Gunmetal Machined Lip Solid
Wheel sizes: 19x9.5
Bolt patterns (PCD): 5x112
| Size (D x J) | Offset (ET) | Bolt pattern (PCD) | Center bore (CB) | Hole type | Lug hole (mm) | Load (kg) | Weight (kg) | Stock | Copy specs |
|---|---|---|---|---|---|---|---|---|---|
| 19x9.5 | 35 | 5x112 | 66.5 | 0 |
What these numbers mean
- Size (D x J)
- Diameter in inches, then rim width in inches: 19x9.5 is a 19 inch wheel with a 9.5 inch wide rim. The J after a width, as in 9.5J, names the rim flange profile.
- Offset (ET)
- The distance in mm from the wheel's centerline to its mounting face. WD0231 comes in ET 35; a lower ET sits the wheel further out.
- Bolt pattern (PCD)
- The number of bolts and the diameter in mm of the circle they sit on: 5x112 is 5 bolts on a 112 mm circle. It must match the vehicle.
- Center bore (CB)
- The central hole that sits over the vehicle's hub: 66.5 mm for WD0231. A bore larger than the hub needs centering rings.
Fits the same bolt pattern and size
Same PCD, wheel diameter and a compatible center bore.
Similar finish and range
Same collection, with a matching finish or vehicle brand.
Similar design
Wheels that look alike, from the same collection. Check the bolt pattern before you order.
