WD0231 Forged Alloy Wheel

WD0231 is a forged alloy wheel (rim) in 7 finishes. It is an aftermarket design. It comes in 18–19 inch: 3 sizes (18x8, 19x8.5, 19x9.5), 2 bolt patterns (5x112 and 5x114.3), offset ET 30–38 mm and center bore 66.45–73.1 mm. Not sure what PCD, ET and CB mean? Read how to choose wheels.

WD0231 alloy wheel rim – Matte Black Machined Lip + Milled Lettering
WD0231 alloy wheel, photo 1WD0231 alloy wheel, photo 2WD0231 alloy wheel, photo 3

No photo for this finish yet; showing another finish of WD0231.

Finish

Wheel sizes: 18x8, 19x8.5, 19x9.5
Bolt patterns (PCD): 5x112, 5x114.3
Sizes and specifications of WD0231 in Matte Black Machined Lip + Milled Lettering
Size (D x J)Offset (ET)Bolt pattern (PCD)Center bore (CB)Hole typeLug hole (mm)Load (kg)Weight (kg)StockCopy specs
18x8385x11266.45Ball seat15*32*R12.87508.9
18x8385x114.373.1Cone seat15*32*607508.92
19x8.5305x11266.515*32.5*60750101
19x8.5385x114.373.115*32*607509.7
19x9.5355x11266.515*32.5*60750103
19x9.5385x114.373.115*32*60750104

What these numbers mean

Size (D x J)
Diameter in inches, then rim width in inches: 18x8 is a 18 inch wheel with a 8 inch wide rim. The J after a width, as in 8J, names the rim flange profile.
Offset (ET)
The distance in mm from the wheel's centerline to its mounting face. WD0231 comes in ET 30–38; a lower ET sits the wheel further out.
Bolt pattern (PCD)
The number of bolts and the diameter in mm of the circle they sit on: 5x112 is 5 bolts on a 112 mm circle. It must match the vehicle.
Center bore (CB)
The central hole that sits over the vehicle's hub: 66.45–73.1 mm for WD0231. A bore larger than the hub needs centering rings.

Fits the same bolt pattern and size

Same PCD, wheel diameter and a compatible center bore.

Similar finish and range

Same collection, with a matching finish or vehicle brand.

Similar design

Wheels that look alike, from the same collection. Check the bolt pattern before you order.