6168 Cast Alloy Wheel
6168 is a cast alloy wheel (rim) in 1 finish: Gunmetal Machined Face. It is an OEM-fit replacement, made to the size, bolt pattern, offset and center bore of the original wheel. It comes in 16 inch: 1 size (16x6), 1 bolt pattern (5x114.3), offset ET 36 mm and center bore 56.6 mm. Listed for Baojun. Not sure what PCD, ET and CB mean? Read how to choose wheels.
Finish
Wheel sizes: 16x6
Bolt patterns (PCD): 5x114.3
| Size (D x J) | Offset (ET) | Bolt pattern (PCD) | Center bore (CB) | Hole type | Fits | Stock | Copy specs |
|---|---|---|---|---|---|---|---|
| 16x6 | 36 | 5x114.3 | 56.6 | Cone seat | Baojun | 0 |
What these numbers mean
- Size (D x J)
- Diameter in inches, then rim width in inches: 16x6 is a 16 inch wheel with a 6 inch wide rim. The J after a width, as in 6J, names the rim flange profile.
- Offset (ET)
- The distance in mm from the wheel's centerline to its mounting face. 6168 comes in ET 36; a lower ET sits the wheel further out.
- Bolt pattern (PCD)
- The number of bolts and the diameter in mm of the circle they sit on: 5x114.3 is 5 bolts on a 114.3 mm circle. It must match the vehicle.
- Center bore (CB)
- The central hole that sits over the vehicle's hub: 56.6 mm for 6168. A bore larger than the hub needs centering rings.
Fits the same bolt pattern and size
Same PCD, wheel diameter and a compatible center bore.
Similar finish and range
Same collection, with a matching finish or vehicle brand.
Similar design
Wheels that look alike, from the same collection. Check the bolt pattern before you order.
