WD578 Cast Alloy Wheel
WD578 is a cast alloy wheel (rim) in 1 finish: Gloss Black Machined Face. It is an OEM-fit replacement, made to the size, bolt pattern, offset and center bore of the original wheel. It comes in 19 inch: 1 size (19x7.5), 1 bolt pattern (5x100), offset ET 28 mm and center bore 57.1 mm. Listed for Bestune. Not sure what PCD, ET and CB mean? Read how to choose wheels.
Finish
Wheel sizes: 19x7.5
Bolt patterns (PCD): 5x100
| Size (D x J) | Offset (ET) | Bolt pattern (PCD) | Center bore (CB) | Hole type | Fits | Stock | Copy specs |
|---|---|---|---|---|---|---|---|
| 19x7.5 | 28 | 5x100 | 57.1 | Cone seat | Bestune | 50+ |
What these numbers mean
- Size (D x J)
- Diameter in inches, then rim width in inches: 19x7.5 is a 19 inch wheel with a 7.5 inch wide rim. The J after a width, as in 7.5J, names the rim flange profile.
- Offset (ET)
- The distance in mm from the wheel's centerline to its mounting face. WD578 comes in ET 28; a lower ET sits the wheel further out.
- Bolt pattern (PCD)
- The number of bolts and the diameter in mm of the circle they sit on: 5x100 is 5 bolts on a 100 mm circle. It must match the vehicle.
- Center bore (CB)
- The central hole that sits over the vehicle's hub: 57.1 mm for WD578. A bore larger than the hub needs centering rings.
You may also like
WD574
1 specs · 1 colour
5x100 · 18"
6126
1 specs · 1 colour
Gloss Black Machined Face
WD577
1 specs · 1 colour
Gloss Black Machined Face
FBX045
4 specs · 1 colour
Gloss Black Machined Face
REW014
5 specs · 1 colour
Gloss Black Machined Face
RHD1008
4 specs · 1 colour
Gloss Black Machined Face
RHD1025
2 specs · 1 colour
Gloss Black Machined Face
RHX1008
3 specs · 1 colour
Gloss Black Machined Face
Similar design
Wheels that look alike, from the same collection. Check the bolt pattern before you order.
