WD0340 Forged Alloy Wheel in Matte Gunmetal (Full Paint) + Gloss Black

WD0340 is a forged alloy wheel (rim) in Matte Gunmetal (Full Paint) + Gloss Black, one of 14 finishes. It is an OEM-fit replacement, made to the size, bolt pattern, offset and center bore of the original wheel. It comes in 22 inch: 1 size (22x9.5), 1 bolt pattern (5x120), offset ET 42.5 mm and center bore 72.56 mm. Listed for Land Rover. Not sure what PCD, ET and CB mean? Read how to choose wheels.

More wheels for Land Rover.

WD0340 alloy wheel rim – Matte Gunmetal (Full Paint) + Gloss Black
WD0340 alloy wheel, photo 1WD0340 alloy wheel, photo 2WD0340 alloy wheel, photo 3WD0340 alloy wheel, photo 4WD0340 alloy wheel, photo 5

No photo for this finish yet; showing another finish of WD0340.

Finish

Wheel sizes: 22x9.5
Bolt patterns (PCD): 5x120
Sizes and specifications of WD0340 in Matte Gunmetal (Full Paint) + Gloss Black
Size (D x J)Offset (ET)Bolt pattern (PCD)Center bore (CB)Hole typeLug hole (mm)Load (kg)Weight (kg)FitsStockCopy specs
22x9.542.55x12072.56Cone seatLand Rover1

What these numbers mean

Size (D x J)
Diameter in inches, then rim width in inches: 22x9.5 is a 22 inch wheel with a 9.5 inch wide rim. The J after a width, as in 9.5J, names the rim flange profile.
Offset (ET)
The distance in mm from the wheel's centerline to its mounting face. WD0340 comes in ET 42.5; a lower ET sits the wheel further out.
Bolt pattern (PCD)
The number of bolts and the diameter in mm of the circle they sit on: 5x120 is 5 bolts on a 120 mm circle. It must match the vehicle.
Center bore (CB)
The central hole that sits over the vehicle's hub: 72.56 mm for WD0340. A bore larger than the hub needs centering rings.

Fits the same bolt pattern and size

Same PCD, wheel diameter and a compatible center bore.

Similar finish and range

Same collection, with a matching finish or vehicle brand.

Similar design

Wheels that look alike, from the same collection. Check the bolt pattern before you order.