WD476 Cast Alloy Wheel
WD476 is a cast alloy wheel (rim) in 1 finish: Gloss Black Machined Face. It is an OEM-fit replacement, made to the size, bolt pattern, offset and center bore of the original wheel. It comes in 18 inch: 1 size (18x8), 1 bolt pattern (6x130), offset ET 35 mm and center bore 75.1 mm. Listed for Toyota. Not sure what PCD, ET and CB mean? Read how to choose wheels.
More wheels for Toyota.
Finish
Wheel sizes: 18x8
Bolt patterns (PCD): 6x130
| Size (D x J) | Offset (ET) | Bolt pattern (PCD) | Center bore (CB) | Hole type | Fits | Stock | Copy specs |
|---|---|---|---|---|---|---|---|
| 18x8 | 35 | 6x130 | 75.1 | Flat seat | Toyota | 2 |
What these numbers mean
- Size (D x J)
- Diameter in inches, then rim width in inches: 18x8 is a 18 inch wheel with a 8 inch wide rim. The J after a width, as in 8J, names the rim flange profile.
- Offset (ET)
- The distance in mm from the wheel's centerline to its mounting face. WD476 comes in ET 35; a lower ET sits the wheel further out.
- Bolt pattern (PCD)
- The number of bolts and the diameter in mm of the circle they sit on: 6x130 is 6 bolts on a 130 mm circle. It must match the vehicle.
- Center bore (CB)
- The central hole that sits over the vehicle's hub: 75.1 mm for WD476. A bore larger than the hub needs centering rings.
You may also like
7167
1 specs · 1 colour
6x130 · 17"
028
1 specs · 1 colour
Gloss Black Machined Face
2026
1 specs · 1 colour
Gloss Black Machined Face
7062
2 specs · 2 colours
Gunmetal Machined Face
7089
1 specs · 1 colour
Gloss Black Machined Face
8016
1 specs · 1 colour
Gloss Black Machined Face
RHX1128
3 specs · 1 colour
Gloss Black Machined Face
WD042
6 specs · 2 colours
Gloss Black Machined Face
Similar design
Wheels that look alike, from the same collection. Check the bolt pattern before you order.
