WD345 Cast Alloy Wheel
WD345 is a cast alloy wheel (rim) in 2 finishes: Gloss Black Machined Face and Gunmetal Machined Face. It is an OEM-fit replacement, made to the size, bolt pattern, offset and center bore of the original wheel. It comes in 18–19 inch: 2 sizes (18x7.5, 19x7.5), 1 bolt pattern (5x114.3), offset ET 51 mm and center bore 67.1 mm. Listed for Hyundai. Not sure what PCD, ET and CB mean? Read how to choose wheels.
More wheels for Hyundai.
No photo for this finish yet; showing another finish of WD345.
Finish
Wheel sizes: 18x7.5, 19x7.5
Bolt patterns (PCD): 5x114.3
| Size (D x J) | Offset (ET) | Bolt pattern (PCD) | Center bore (CB) | Hole type | Fits | Stock | Copy specs |
|---|---|---|---|---|---|---|---|
| 18x7.5 | 51 | 5x114.3 | 67.1 | Cone seat | Hyundai | ||
| 19x7.5 | 51 | 5x114.3 | 67.1 | Cone seat | Hyundai |
What these numbers mean
- Size (D x J)
- Diameter in inches, then rim width in inches: 18x7.5 is a 18 inch wheel with a 7.5 inch wide rim. The J after a width, as in 7.5J, names the rim flange profile.
- Offset (ET)
- The distance in mm from the wheel's centerline to its mounting face. WD345 comes in ET 51; a lower ET sits the wheel further out.
- Bolt pattern (PCD)
- The number of bolts and the diameter in mm of the circle they sit on: 5x114.3 is 5 bolts on a 114.3 mm circle. It must match the vehicle.
- Center bore (CB)
- The central hole that sits over the vehicle's hub: 67.1 mm for WD345. A bore larger than the hub needs centering rings.
Fits the same bolt pattern and size
Same PCD, wheel diameter and a compatible center bore.
Similar finish and range
Same collection, with a matching finish or vehicle brand.
Similar design
Wheels that look alike, from the same collection. Check the bolt pattern before you order.
