WD0213 Forged Alloy Wheel in Gunmetal Machined Face
WD0213 is a forged alloy wheel (rim) in Gunmetal Machined Face, one of 2 finishes. It is an OEM-fit replacement, made to the size, bolt pattern, offset and center bore of the original wheel. It comes in 20 inch: 1 size (20x8.5), 1 bolt pattern (6x139.7), offset ET 30 mm and center bore 106 mm. Not sure what PCD, ET and CB mean? Read how to choose wheels.
No photo for this finish yet; showing another finish of WD0213.
Finish
Wheel sizes: 20x8.5
Bolt patterns (PCD): 6x139.7
| Size (D x J) | Offset (ET) | Bolt pattern (PCD) | Center bore (CB) | Hole type | Lug hole (mm) | Load (kg) | Weight (kg) | Stock | Copy specs |
|---|---|---|---|---|---|---|---|---|---|
| 20x8.5 | 30 | 6x139.7 | 106 | Flat seat | 20*35 depth 17 | 950 | 12.9 | 3 |
What these numbers mean
- Size (D x J)
- Diameter in inches, then rim width in inches: 20x8.5 is a 20 inch wheel with a 8.5 inch wide rim. The J after a width, as in 8.5J, names the rim flange profile.
- Offset (ET)
- The distance in mm from the wheel's centerline to its mounting face. WD0213 comes in ET 30; a lower ET sits the wheel further out.
- Bolt pattern (PCD)
- The number of bolts and the diameter in mm of the circle they sit on: 6x139.7 is 6 bolts on a 139.7 mm circle. It must match the vehicle.
- Center bore (CB)
- The central hole that sits over the vehicle's hub: 106 mm for WD0213. A bore larger than the hub needs centering rings.
You may also like
WD0329
1 specs · 1 colour
6x139.7 · 19"
WD0212
1 specs · 1 colour
Gloss Black Machined Face
WD0216
2 specs · 1 colour
Gloss Black Machined Face
WD0044
50 specs · 5 colours
Gloss Black Machined Face
WD0245
7 specs · 2 colours
Gloss Black Machined Face
WD0002
21 specs · 3 colours
Gloss Black Machined Face
WD0027
20 specs · 2 colours
Gloss Black Machined Face
WD0028
21 specs · 3 colours
Gloss Black Machined Face
Similar design
Wheels that look alike, from the same collection. Check the bolt pattern before you order.
